Home > List of Keywords > *STRTETA0
*STRTETA0
Data format:
One line with 3 values
TETA0 ALLOW_COR DTINTT
Status :
Optional
Purpose :
PoDeep post-processing only
Details :
| Parameter | Description |
|---|---|
| TETA0 | Rotation angle used to locate the 4 points where to compute the stress, with respect to the local axis 1. |
| ALLLOW_COR | Corrosion allowance in m. This parameter is optional. |
| DTINTT | Number of time steps ignored when reading the .DTB file(from the end of .DTB file). This parameter is optional. |
Example :
*STRTETA0
45. 0. 10
means that the stresses will be computed by PoDeep along the pipe circumference at positions 45, 135, 225 and 315 wrt to local axis 1, with no corrosion allowance, and without reading the 10 last time steps increments from the .DTB file.
Notes :
Podeep may post-process stresses only on four points in the beam section. To get results on more points, it is possible to define the initial angle locating the first point on the section with respect to the local axis 1.
This keywords may be changed just before post-processing without re-running the calculations.
